Our Business
KTG Industrial

Specifications - Ready built factory for lease, factory for rent

 

1. ADVANTAGES:

  • Reduce risk and uncertainty of land acquisition
  • Open choice of locations
  • Continued expansion
  • Shorten the start-up period with immediately available space
  • Available in many prime locations
  • High quality, ready-to-use facilities in various sizes and specifications
  • Minimizing opportunity loss :

2. STATE-OF-THE-ART FLOOR

    3 KEYS ELEMENTS TO THE GREAT FLOOR:

         icon-check STABILITY

         icon-check  DURABILITY

         icon-check  FLATNESS

    INDUSTRIAL CONCRETE FLOOR:

  • Industrial concrete mix with high compressive strength of 400 kilogram-forces per square centimeter is used to construct our floor to increase durability of the floor which will accommodate heavy duty operations in the warehouse.

3. BURNISHED FLOOR FINISH

  • After casting the reinforced concrete slab, the floor surface is polished with high-speed trowel machine to enhance floor surface durability as well as to provide the shiny-finish appearance of the floor slab. Our floor slab is also constructed with high flatness and levelness values in accordance with international standards.

4. CONTROL JOINTS AND MOVEMENT JOINTS

  • Control joints and movement joints are suitably designed to minimize drying and long-term shrinkage cracks in the concrete floor.

5. SINGLE METAL SHEET ROOFING

  • Benefits of single metal sheet roofing
  • No bolt connections
  • Rain leakage prevention
  • Wind speed resistant

6. METAL SHEET ROOFING

  • Our metal sheet roofing has no bolt connections to prevent rain leakage and is designed to resist a wind speed of 110 kilometers per hour. This metal sheet roofing is made of Zincalume high-tensile steel grade to ensure strength and durability of the roofing.

7. SKYLIGHTS

  • Skylights are installed to allow light transmission through the internal area of the warehouses during day time for energy saving purposes.

8. INSULATION

  • Glass wool insulation with a thickness of 10 centimeters and density of 24 kilograms per cubic meter is provided at the underside of the purlins to create an air-gap between the metal sheet and the insulation to ensure a greater reduction of heat transfer. It is also non-water absorbent and has no flame-spread properties

9. EXTRA CLEAR HEIGHT

  • Our warehouse is designed with extra clear height of 10-12 meters in corresponding with the floor loading capacity which allows maximum utilization of the warehouse space, as well as increasing ventilation within the internal area.

10. NATURAL VENTILATION

  • Extra roof ridge (Jack Roof) to allow hot air exhaust
  • Louvered sidings to allow fresh air intake
  • High air change rate
  • Healthy and comfortable environment

 

11. OVERHEAD DOORS WITH HYDRAULIC DOCK LEVELERS

  • We provide high quality hydraulic dock levelers and overhead doors at loading bays (minimum 1 per 1,000 square meters) to facilitate quick product movement. Tail gate slots are provided at every loading bay with the floor height raised to 1.3 meters. A loading ramp is also provided to facilitate the loading and unloading activities.

 

12. WIDE COLUMN SPAN

  • Our large column span of 18-30 meters is suitable for installing racking systems and other equipment. It allows our customers to reach the highest efficiency in their operations with flexible and smooth movement within the warehouse

13. MANEUVERING SPACE

  • At least 30 meters length of maneuvering space is provided to support the turning radiusof trailer trucks.

 

 

14. CANOPY

  • Our extra long canopy (10 meters) is provided to protect against sun and rain during loading/unloading activities, with lighting fixtures for night time operations.

 

15. PEST PROTECTION

  • Steel nets are installed along the louvers to prevent birds and other animals perching or nesting inside the warehouse area.

16. LIGHTING FIXTURES

  • Ample high pressure, energy saving lighting fixtures (T5) of 300 lux are installed to provide light during nighttime operations.

17. BATTERY CHARGING AREA

  • A battery charging area with power plugs is allocated at an area with good airflow inside the warehouses for convenience.

18. OFFICE AREA

  • The office area is designed to facilitate optimal office operationsand includes a pantry area and suitable restroom facilities. (Shower rooms are available upon request). Lighting fixtures (T8) of 500 lux are also installed to support daily operations.